|
Stainless
Steel Unvented Hot Water Cylinders
"...
the best of both worlds."
Up until now, installers and specifiers have had two choices when it came
to unvented hot water cylinders. The first is the 'standard' system,
where an external expansion vessel needs to be connected by the
installer. The second uses an internal air bubble, which removes the
need for the vessel, but introduces the disadvantage of regular servicing
to maintain the air bubble.
Now
there is a third choice... the DPS Amazon unvented hot water
cylinder is supplied with an external expansion vessel fitted inside the
unit casing, removing the need for installers having to connect the
vessel, while at the same time overcoming the disadvantage of having to
service a bubble. In other words, the best of both worlds.
The
Amazon Super cylinder has a Stainless Steel inner Vessel with a lifetime
guarantee. It is highly insulated and finished in a White Vinyl Steel
Casing and inside this casing is fitted the Expansion Vessel. A water
Inlet Control assembly with filter and back feed protection is supplied
for site installation.
| Model Code |
125 |
150 |
170 |
200 |
250 |
300 |
| Capacity (litres) |
125 |
150 |
170 |
200 |
250 |
300 |
| Overall Diameter (mm) |
520 |
570 |
| Overall Height (mm) |
1420 |
1540 |
1280 |
1600 |
190 |
2140 |
| Weight, Full (Kg) |
165 |
195 |
220 |
250 |
310 |
360 |
| Maximum Working Pressure (bar) |
3 |
| Maximum Water Supply Pressure (bar) |
12 |
| Cold Feed / Hot Supply Connections (mm) |
22 |
| Primary Flow and Return Connections (mm) |
22 |
| Expansion Vessel Pre-Charge Pressure (bar) |
3 |
| Expansion Relief Valve Set Pressure (bar) |
5 |
| Temperature and Pressure Relief Valve (bar / °C) |
7/90 |
| Heat up time (mins) from - 65°C - INDIRECT MODELS
# |
36 |
37 |
36 |
33 |
35 |
40 |
| Heat up time (mins) from - 65°C - DIRECT MODELS # |
72 |
86 |
98 |
108 |
144 |
202 |
| Re-Heat time (mins) after 70% used - INDIRECT
MODELS # |
25 |
26 |
25 |
24 |
25 |
29 |
| Re-Heat time (mins) after 70% used - DIRECT MODELS
# |
37 |
45 |
51 |
63 |
75 |
136 |
# Assuming cold water supply at 15°C.
CYLINDER - CONSTRUCTED OF 316 GRADE STAINLESS STEEL. DOMES ARE WELDED
INTO POSITION PROVIDING A STRONG AND RELIABLE VESSEL
INSULATION - RIGID POLYURETHANE FOAM - CFC AND HCFC FREE
ELECTRIC RATING - 2.7KW / 230V IMMERSION HEATERS (2 ON ALL DIRECT & 1 ON ALL INDIRECT)
PRIMARY COIL - 22MM CONTINUALLY WOUND COIL
CYLINDER THERMOSTAT - ON INDIRECT UNITS ONLY - TWIN PROBE WITH MANUAL RE-SET
FOR OVERHEAT CUT-OUT
SAFETY FEATURE - FACTORY FITTED TEMPERATURE AND PRESSURE RELIEF VALVE
Optional Extras
Direct Cylinders
Code IHC - Immersion Heater Controller for use with Economy 7
(Only 1No. 16 Amp Supply required)
Indirect Cylinders
Code YP - ‘Y’ Plan Controls Factory Fitted to Cylinder.
Code SP - ‘S’ Plan Controls Factory Fitted to Cylinder.
Code SS - Sealed Primary Controls Factory Fitted to Cylinder.
Other Options May Be Available On Request | 
