Sorry, your browser doesn't support Java(tm).

High Quality Showers without the need for
pumps or pressurised hot water storage !!! 

Quite simply, the easiest and cheapest way 
to improve a poor quality shower.

Selecting the best shower for your home can sometimes be complex, particularly choosing the right one for your domestic plumbing system.

If your hot water comes from a conventional hot water tank fed by a smaller cold tank, normally if your airing cupboard or loft, then the H2O is designed for you.

Whilst other types of shower require either electrical connections or expensive re-plumbing to work effectively, the H2O is designed to work perfectly with the minimum of disruption and expense.

The solution is beautifully simple, the H2O harnesses the pressure of your mains water to power your hot water giving you a strong and invigorating shower.

The H2O system utilises the proven technology of the Venturi nozzle, hot water is drawn in at high speed to create a controllable water temperature giving you the ultimate natural power shower.

Flowing curves combine beautifully with the ergonomic design features to create the complete natural power shower solution for your bathroom.

Just imagine a power shower that harnesses the natural power of your existing water supply and gives you the most invigorating and refreshing shower.

There's no need for noisy pumps, complex re-plumbing or expensive electrical work. H2O provides a reliable and economical solution giving you the power to choose a system that puts you in control!

The unit comes in 6 colours: slate      , indigo      , ice      , platinum (metallic finish), amethyst      and blueberry     .

Detailed Installation Requirements...


Designed to suit gravity fed plumbing systems

Not recommended for installation with pressurised storage systems or combination boilers due to possible temperature regulation problems

Recommended hot water temperature is 60°C which ensures a shower of approximately 44°C can be achieved even in the coldest of winter conditions. Hot water supply should not exceed 75°C

A minimum 1 bar (15 psi) cold running pressure and a maximum of 10 bar (150psi) static pressure is necessary to ensure the effective operation of the system

A minimum of 0.3 M (12) head of water is necessary ( see diagram) to ensure effective operation. A maximum head of 5M (16) is recommended to prevent temperature regulation problems

The hot water inlet has an integral single check valve to conform with water bylaws. Further check valves Must not be fitted to the hot supply as this will disrupt performance

Cold water should be supplied via a double check valve fitted outside the unit. A single check valve may be used only if the soap dish with the shower hose retainer is fitted

It is recommended that isolation valves are fitted to both hot and cold inlets to facilitate future maintenance.

These may be housed within the casing of the unit.