Heat Bank Thermal Store System Stowaway advanced F+E 14 Plate Heat Exchanger (30 ltr/min) Immersion Heater Relays Electrically heated 40mm Foam Insulation All fitted controls are wired
3m Mains Supply Cables Manual Fill - No Overflow Thermostatic Blending Valve 22mm
Full Low Water Level Cut-Out
Overheat Protection Cased
Unit Code |
SC-130-1271-3 | SC-150-1271-3 | SC-180-1271-3 | SC-210-1271-3 | SC-250-1271-3 |
Capacity [litres] |
130 | 150 | 180 | 210 | 250 |
Base Diameter [mm] |
450 | 450 | 450 | 450 | 450 |
Overall Diameter [mm] |
530 | 530 | 530 | 530 | 530 |
Height [mm] |
1050 | 1170 | 1360 | 1550 | 1800 |
1 Integral Expansion Vessel (Unpressurised) 2 Plate Heat Exchanger 3 Heat Exchanger Pump 4 Flow Switch 6 Manual Air Vent 7 Automatic Air Vent 8 Integral Overflow Chamber 9 Store Filling Point 11 Y-Pattern Strainer (supplied loose) 13 Connection to Expansion Vessel 14 Boost Immersion Heater 3kW Incaloy with Stat 15 Economy Immersion Heater 3kW Low Noise with Stat 16 Cold Mains In, 22mm 17 Hot Mains Out, 22mm 18 Drain Cock 39 White Coated Steel Casing 40 Tight Fitting Lid 42 Wiring Centre 54 Filling Loop (disconnect after use) 55 Water Level Switch 56 Manual Water Level Test and Drain 66 Overfill Drain Cock 72 Manual Reset Overheat Thermostat
|
|