 |
  |
|
|
|
|
Domestic
& Industrial |
Domestic
Immersion Heaters -21/4"BSP.
|
|
We offer a very wide range of domestic heaters, fitted with 21/4"BSP solid brass stamped head to suit all water conditions. THE STANDARD copper sheathed range is for use in soft water areas, and the higher specification THERMOLOY range is for use in hard and aggressive water conditions, with THRRMOLOY 825 heaters suitable for areas where severe water corrosion is encountered. |
|
|
|
A new range heaters can be supplied both
with and without fitted thermostats. The range includes heaters to
MAXISTORE specification (extra long life/low noise) and DUOTHERM
Dual Immersion Heaters. All are designed to meet current and future
UK and EEC Standard requirements, including the new EN 60335
Standards applicable from May 1999
|
|
Industrial Heaters
|
| Industrial Heaters A high quality range of industrial heaters is available, rated from 1 kW to 18 kW, three phase and single phase. All heaters are fitted with long life THERMOLOY elements, heavy-duty terminal covers & thermostat. A range of head sizes from 11/4"BSP to 21/4"BSP is produced. Terminal enclosures meet protective requirements up to IP65. A wide range is available from stock. Control equipment for these heaters is available, to control loads up to 45kW. |
|
OEM Immersion heaters
|
|
We can design and produce water heaters
to suit special water heating systems. A wide range of
thermostats, fixing plates or bosses and element designs is
available to suit most models of heaters. A data sheet is
available upon request for each product range, itemising products
available & prices.
|
Water
Heaters |
GEEZA 2000/3000
|
| A unique, highly energy efficient immersion heater system, fitted externally to the hot water cylinder. It provides hot water very fast, and can be used on Economy 7 for extra cost efficiency. Easily fitted, very easy to replace and eliminates removal problems often encountered with conventional immersion heaters. A highly economical 2kW model is standard and a 3kw rating is also available, and safety versions incorporating thermal cut-out are also produced. Particularly recommended where low maintenance and running costs are essential. |
|
|
|
Coronette Water Heater
|
| A versatile, mini storage/instantaneous water heater for over and under sink use. A truly "instant" design of water heater for handwashing, and if used with the high quality tap sets gives ample hot water for most household applications. Its robust construction makes it particularly suitable in high usage areas, and its design has an unequalled reputation for reliability. |
Special
Products |
Heaters for Unvented Water Systems
|
|
In response to the ever increasing demand
for the unvented systems, we offer a very wide range to suit the
specific needs of this type of water heater product. All our
immersion heaters are fitted with dual safety thermostat devices,
long-life THERMOLOY elements, are supplied fully prewired and
conform to BS/EN Standards. Loading range from 1 kW to 6kW, and head
of all sizes
are available. Heavy duty terminal covers can be specified if required. |
|
|
|
11/4"BSP
Heaters
|
| Commonly used in Europe, the Middle East and Southern Africa, we can offer this type of heater fitted with either the Italian "plug-in" type thermostat, or the UK wireable thermostat. Used in storage water heater systems, catering equipment, and commercial heaters where space is restricted. Loadings from 1 kW to 4kW are available. |